Last Modified: 11-29-2007 1.6 G Service Category: Vehicle Interior Section: Lighting (int) Model Year: 2008 Model: Sequoia Doc ID: RM000001DKJ00OX Title: LIGHTING (INT): ROOM LIGHT SWITCH: INSPECTION (2008 Sequoia) INSPECTION 1. INSPECT INTERIOR DOME LIGHT SWITCH ASSEMBLY (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Switch Condition Specified Condition 5 (FCTY) - 10 (FLMP) DOOR Below 1 Ω 7 (E) - 10 (FLMP) ON Below 1 Ω If the result is not as specified, replace the interior dome light switch.

(b) Check the illumination operation.

(1) Connect the positive (+) battery lead to terminal 1 (Ill+) and the negative (-) battery lead to terminal 4 (Ill-), and then check that the illumination illuminates.

OK:

Illumination illuminates.

If the result is not as specified, replace the interior dome light switch.